Pallet Herringbone Arrow

I'm kind of loving this herringbone look for my pallet art.
Arrows are always a good choice.

I came up with this design while sitting in the Doctor's office
waiting to see if my #2 boy will get his finger "freshened" again
or if the break is healing.
(Freshened means re-agitating the break so it will heal properly,
a disgusting and super cool procedure where the Doctor numbed his
finger and then jammed the break over and over with a large gauge needle.)

I know.  My inspiration comes in the strangest places.

Usually it comes in the early morning or late night hours when I wish
I was sleeping but my brain is in overdrive.

I loved putting together the hearts and wanted to try a different shape.
Gotta love arrows!

It took me a little while to decide how to put together the point
and then work my way down.
Each piece was put in place, marked and then cut.
I had to use the jig saw to cut the small piece around the arrow point.
Too close for comfort using the mitre saw.
I still need all my fingers. ;)

After all that, I sanded each piece and painted some of them.
I made 2 arrows at the same time, my normal MO, and it made
the process that much more productive.

I've got another one I'm working on now that is a custom order.
She wants it all grays and white, with a touch of blue.
I will definitely share when it's done.

After the paint dried, the pieces were glued in place and let sit overnight.

A good sanding all around the edges and some hanging hardware finished things up.

Herringbone Arrows!

This design will definitely be going to Junk in the Trunk in May.

Pallet Herringbone Heart

I know its been a while.

A few months to be exact.

But September was my first Junk in the Trunk experience.

I was super excited and nervous.

Would my stuff sell?

What is the competition like?

How many pieces are enough?

How am I going to get everything done in time?

Do I have enough wood?

The booth looked amazing! 

{M&J} from Twigs and Twine took a whole lotta

pallet wood and made these walls.

Like 42-ish pallets worth.

The pallets I cut up for the walls were from a Solar Panel company

in Mesa, AZ.  They looked like this, with my sweet and patient

hubby modeling it for me.

They aren't heavy and the wood is more like plywood with layers.

But it is uniform in size, width and length.

If you use pallets with any kind of regularity, that never happens.

Luckily for me I stumbled upon these on Craigslist.

It's always amazes me how that happens.

I need a specific type of pallet wood and a batch

nearly drops in my lap.

It happens again and again.

For that I know I'm extremely blessed.

Anyway back to business.

Since we took apart so many pallets,

we had all the cross pieces left over.

I have a hard time throwing any good wood away,

and I had to think about how to use the leftover wood.

It was easy to cut them apart with a skill saw but

it left me with about 8 inch pieces.

Now what?

I'm a secret Tetris and Dr Mario girl at heart.

Give me anything else and I'm a complete Klutz.

My kids don't let me play because I'll just kill of the character in about 10 seconds.

But give me pieces that have to fit together and I'm all about that.

So these hearts were a natural fit for me.

I love herringbone and chevron shapes.

Why can't I do that with my little pieces of leftover pallet wood?

So I did!

Before Junk in the Trunk opened, they posted this little beauty

on their instagram site.

I was stunned.

Me.

My project.

My art.

Honored and humbled to say the least.

{J} said that the woman who bought this piece waited in line for a long time

to be the first one in the show to run and buy it before anyone else could.

Now I know I should have made more.

This one was 3x3 but I also made some that were 2x2.

Here's a few pics of everything that went to the show.

Everything but 2 pieces sold.

I should have made more.

Did I say that before...

Yep. I should have made more.

So now you want to know how I did it?

Easy.

I cut up the pallets and got a bunch of about 8 inch pieces.

These work well for this heart because they are all the same width and thickness.

It would be hard to do with varying sized wood.

Probably not impossible, but it would be a little more

than my math challenged brain could handle.

After getting the pallets cut up, I used my mitre saw and cut them at

22.5 degrees.  Both sides.

It's Ok that they aren't exactly the same length.

I didn't want the herringbone to be perfect.

Sand and paint the slats.

A little of this, a little of that.

My sweet SIL wanted one with gold so I spray painted some of the pieces

with shiny gold paint and let them dry.

Once the pieces are ready, I need a back.

I buy a thin-ish piece of plywood from Lowe's or HomeDepot

and have them cut it for me.  It needs to be sturdy but not too heavy.

I can get 2 3x3's and 2 2x2's plus some extra

for arrows out of one 4x8 sheet.

I used my jigsaw to cut out the shape.

You can sand the edges at this point, but I usually don't 

because I give the whole thing a good sanding when it's done.

I usually try to start with one side cut straight and start arranging the pieces

alternating colors.

Once it's all covered,

I start gluing, one line of slats at a time.

Be careful to press them into place and keep everything even

and as straight as possible.

I love this part because it really is like a giant game of tetris.

It's ok if the curved part of the heart has pieces hanging over.

You will cut them off when the glue is dry.

I lay whatever I have that is heavy on the slats and let it dry overnight.

Usually it's horseshoes and hand weights. 

Once the glue is dry, flip the heart over, check for any pieces that may have not stuck.  

Re-glue if necessary, then and use a jigsaw to cut around the edge.

I come out about 1/4 inch from the plywood.

Once it's cut, give both sides a good sanding around the edges

and anywhere else you think might need it.

You can add a spray of polyurethane to seal it,

but I don't always do that.

Add hanging hardware and it's done!

My Herringbone Heart!

Love it!

Bits of Everything

I've been crazy busy lately with projects, Christmas and keeping up with custom orders.

(which I love doing by the way!)

Ever since the Junk in The Trunk show in September I've loved making these hearts. 

Someday I will do a tutorial on how they go together.

After making so many of them, I've got it down to a science.

They are so fun and versatile and can be completely customized.

The super unique thing about these are that the wood comes from

solar panel pallets.  The wood is lighter and more of a plywood type.

But the best part is that the wood is all the same thickness and width.

Normal pallet wood isn't at all.

So this design wouldn't work with normal pallet wood.

You could easily buy pine boards to get the same effect

but I like the color differences and texture I get from the pallet wood.

So here's a few pics of what I've been working on.

These hearts are a snap to put together once the pallet slats have been dismantled.

Simply beautiful.

I saw these snowflakes on pinterest and definitely had to make some.

Plus it uses up all my scrap pieces.

Bonus!!

They are super cute and I haven't

taken mine down yet from my front door.

Maybe I'm secretly hoping there will be some snow

here in Phoenix.

I think the closest I will get is this wood snowflake.

Of course I needed a forest to go with it.

Again super easy to put together and it uses my scraps.

I did these signs as my take on one my friend bought at a boutique.

They all sold and I've got another custom order for another one.

I may do one for me.

Love them!!

This last batch are a couple of custom orders I had for Christmas.

I love the challenge of doing a custom piece,

plus having the opportunity to make someone's idea become reality.

And it's back to work.

I promise I will do better and photographing my work and sharing.

Happy New Year!